read more

The IOTAVX SA3 was designed as a high-quality stereo amplifier. In addition to a variety of analogue inputs, the amplifier also has optical and coaxial digital inputs. Together with the optional Bluetooth adapter, which can be connected at the rear, the signals of these digital inputs are internally converted with an excellent Wolfson DAC. For our turntable friends, this is taken care of, the SA3 has an MM Phono stage (Input Capacity 220pF). The easy-to-read display on the front panel makes controlling the SA3 easy and convenient to use with the remote control. The lighting of the display as well as the LEDs on the front can be switched on and off completely. With powerful 100Watts per channel @ 4 ohms, power is always available to drive the speakers. If more power is required, the integrated amplifier can also be used in mono mode (bridged) and combined with another power amplifier (such as the IOTAVX PA3). In this case, the SA3 then provides 180W @ 4 ohms per channel. In addition to this sophisticated and high-quality pre-stage design, the amplifier section of the amplifier also impresses with its particularly efficient design. The Class AB amplifier technology achieves a high degree of efficiency and thanks to the special amplifier circuitry, offers minimal distortion and maximum precision to the sound. Music enjoyment at the highest level and with maximum dynamics is thus nothing in the way.   Manual for the IOTAVX SA3   Product Type: Integrated Stereo amplifier Continuous power (load-dependent): 50W (8Ω, 2 channels), 100W (8Ω, 1 channel bridged), 100W (4Ω, 2 channels), 180W (4Ω, 1 channel Bridged), Audio inputs: 5x RCA (input sensitivity 200mV), 1 x S/PDIF coaxial, 1x Toslink optical, 1 x Bluetooth (IOTAVX Bluetooth adaptor required), 1 x Phono (MM) (input sensitivity 2.5mV) Audio outputs: Speaker connection, 1 x Sub Out, 1 x Pre Out, 1 x headphone output Further inputs and outputs: 1 x RS-232 input, 2 x trigger output, 1 x dimmer control (10 levels) Total harmonic distortion (THD + N): ≤0.02% (nominal value: A weighting) Frequency response (+/- 3dB): 10Hz - 100kHz Power supply: 115VAC or 230VAC, @ 50/60Hz Standby consumption: <0.5W read more

The IOTAVX PA3 is a powerful stereo power amp that uses Class AB amplification technology. The generously dimensioned toroidal transformer provides the power amp with more than enough power at all times, so even difficult music passages can be reproduced absolutely naturally with maximum dynamics. At 4 ohms, the PA3 provides 100 W per channel in stereo mode. If more power is required, the power amp can also be used in mono mode (bridged). In this case, 180W are available for one channel. However, it is not just the pure performance data that characterizes this power amplifier. The specially developed amplifier circuit ensures excellent efficiency of the AB amplifier technology as well as a more precise reproduction with minimized distortion. Another special feature of the stereo power amplifier is the preamp outputs, with which the signal can be passed on to another amplifier as needed. In addition, the PA3 provides trigger and dimmer inputs and outputs so that the device can be synchronized with your other devices with regard to the turn-on and turn-off behaviour as well as the illumination intensity. Quality promise Not only does the IOTAVX PA3 sound fantastic, but we also manufacture it with a heavy steel case and high-quality components. This will ensure that you can enjoy your IOTAVX PA3 for a long time.   Technical specifications Product Type: Stereo power amplifier Continuous power (load-dependent):  50W (8Ω, 2 channels), 100W (8Ω, 1 channel bridged), 100W (4Ω, 2 channels), 180W (4Ω, 1 channel bridged), Connections:                  RCA inputs, 1x Pre Out  Total harmonic distortion (THD + N):  ≤0.02% (nominal value: A weighting) Frequency response (+/- 3dB):  10Hz - 100kHz Power supply:  115VAC or 230VAC, @ 50 / 60Hz Standby consumption:  <0.5W read more

read more

The IOTAVX AVXP1 is a High Quality, High Power, Multi-Channel Power Amplifier that offers 7 channels of class AB amplification with enough real-world power to drive the most difficult speaker loads. With 150W RMS power per channel (8-Ohm Load), the AVXP1 is a perfect partner to the AV1 7.1 Home Theater Preamp/Surround Processor. The IOTAVX AVXP1 delivers power for the most ardent individual, delivers power with the most demanding of home theatre requirements without the slightest strain or loss of detail. The IOTAVX AVXP1 embodies Craftsmanship, Power, Innovation, and Performance you would expect from a brand with this much heritage. We pride ourselves on delivering the best customer service, the best after-sales support and of course don't forget the most affordable solution out there. You will not find a multichannel power amplifier with this capability within this price range. SPECIFICATIONS Amplifier Gain: 29dB Input Sensitivity: 1.2Vrms @ 150W Power Output: 250W with 4ohm load, 2 Channels Driven 170W with 4ohm load, All Channels Driven 150W with 8ohm load, 2 Channels Driven 110W with 8ohm load, All Channels Driven Signal to Noise Ratio Unbalanced Output: ≥110dB Balanced Output: ≥105dB THD+N: ≤0.06% (Rated Condition: A-weighting) Frequency response: 10hz-60Khz (+/-3dB) read more

The IOTAVX AVX1 is the successor to the highly acclaimed AV1. Developed from the ground up, the AVX1 is a high-performance Home Theatre AV Processor that supports 4k UHD HDR video and all the current 5.1 and 7.1 channel surround sound formats. The AVX1 includes six 4k HDMI video inputs, including three that support 4k UHD High-dynamic-range (HDR) video – with HDMI 2.0 and HDCP 2.2, as well as multiple analogue and digital audio inputs for your other audio sources. The AVX1 can be operated via the simple front panel controls, or by the included infrared remote control, and the intuitive menu system makes it simple to configure and operate using either the large VFD display on the front panel or the clear, concise on-screen display. Connectivity Video Inputs and Outputs: (6) HDMI compliant video inputs (3 with full support for 4k UHD HDR video). (2) HDMI compliant video outputs (1 with full support for 4k UHD HDR video). Audio Inputs: (2) Stereo unbalanced analog audio inputs. (1) S/PDIF coaxial digital audio input. (1) Toslink (optical) digital audio input. (1) Bluetooth audio input (requires optional IOTAVX Bluetooth dongle). Audio Outputs: (1) 7.1 Channel Unbalanced audio outputs (RCA) (1) 7.1 Channel Balanced XLR outputs. Other Inputs and Outputs: (1) IR remote control signal input (1) IR remote control signal output (1) RS-232 serial remote-control input (1) Trigger output (programmable) (1) Dimmer Control. (10 Levels) (2) USB data inputs (reserved for firmware updates) Power Requirements 115 VAC to 230 VAC @ 50 / 60 Hz (automatically detected). 25 Watts Consumption. Standby Power Consumption 0.5 watt.   read more

read more

read more

Stephen Fearing’s music is a mesmerizing blend of roots, folk, and pop. Co-founder of Canadian roots-rock supergroup Blackie and The Rodeo Kings, he is a beguiling teller of tales and master guitarist who delights audiences throughout North America, the UK, and Europe. A multi JUNO and Canadian Folk Music award winner, his ninth solo album, Every Soul’s a Sailor, was named 2017 Worldwide Album of the Year by Blues & Roots Radio. This 180g Audiophile LP is the closest you will get to experiencing Stephen sitting in your front room singing and playing for you. TRACK LISTING SIDE 1 1 Johnny’s Lament (4:50) 2 Just in Time to Say Goodbye (5:05) 3 The Things We Did (3:32) 4 Every Soul’s a Sailor (3:57) SIDE 2 5 Time (5:28) 6 When My Baby Calls My Name (3:39) 7 Red Light in the Rain (4:58) 8 Long Walk to Freedom (3:56) read more